Emax Baby Hawk 87mm FPV Micro Quadcopter

The Emax Babyhawk 87mm is a FPV micro quadcopter, it is small abd light, its weight less than 250g, this is tons of fun to fly. I have bought a Emax Babyhawk and I will show my open the Emax Babyhawk box experience.

Part 1: Open the EMAX BABY HAWK’ package

EMAX BABY HAWK 87mm FPV MICRO QUAD

EMAX BABY HAWK 87mm FPV MICRO QUAD

After opened the express package and you can see this package.

EMAX BABY HAWK 87mm FPV MICRO QUAD

There is a black sponge in the box to protect the drone.

EMAX BABY HAWK 87mm FPV MICRO QUAD

EMAX BABY HAWK 87mm FPV MICRO QUAD

This is the EMAX BABY HAWK 87mm FPV MICRO QUAD, the whole drone body are white, the frame is made of plastic, and some parts of it are made of Glass fiber. it is very solid and looks very beautiful.

EMAX BABY HAWK 87mm FPV MICRO QUAD

The camera angle upwarp about 15°, the upwarp camera is better for beginners to fly.

EMAX BABY HAWK 87mm FPV MICRO QUAD

Camera and video transmission are linked together, so the frame lines are very simple.

EMAX BABY HAWK 87mm FPV MICRO QUAD

The video transmission FM button is on the back of the camera, press the button for 2s, you can enter and choose the channel, and press the button for 2s again, you will out of the channel.

EMAX BABY HAWK 87mm FPV MICRO QUAD

Here is a set of accessories, spare screws for easy replacement.

EMAX BABY HAWK 87mm FPV MICRO QUAD

The battery is 300mAh 2S 35C, and you can choose other battery which do you like.

PART 2: EMAX BABY HAWK Disassembled

EMAX BABY HAWK 87mm FPV MICRO QUAD

Use the m1.4 screws to fix the motor,

EMAX BABY HAWK 87mm FPV MICRO QUAD

First I dismantle the propeller cover, you should use the m1.4 screws to fix the motors when you dismantle the propeller cover.

EMAX BABY HAWK 87mm FPV MICRO QUAD

The propeller cover weight is about 10g, if you want to have a fast flight, you’d better dismantle the propeller cover.

EMAX BABY HAWK 87mm FPV MICRO QUAD

After dismantle the propeller cover, you can see this drone is very small.

EMAX BABY HAWK 87mm FPV MICRO QUAD

EMAX BABY HAWK 87mm FPV MICRO QUAD

F3 Flight Control is absolutely beautiful, very good welding

EMAX BABY HAWK 87mm FPV MICRO QUAD

Part 3: EMAX BABY HAWK Receiver installation and setup

EMAX BABY HAWK 87mm FPV MICRO QUAD

Install the receiver,

EMAX BABY HAWK 87mm FPV MICRO QUAD

EMAX BABY HAWK 87mm FPV MICRO QUAD

The weight of the drone without battery and cover is 61g;

EMAX BABY HAWK 87mm FPV MICRO QUAD

Equip with battery, the weight is 76g, 

EMAX BABY HAWK 87mm FPV MICRO QUAD

Equip with the cover and battery is 86g, it is a little heavy, but it is necessary fly indoor.

This is the specs of The Emax Babyhawk:

  • Wheelbase: 85mm
  • Size: 132 x 132 x 48mm
  • AIO FPV camera: 520TVL CMOS, 5.8G 40CH 25mW / 200mW
  • Propeller: TS2345 tri-blade
  • Flight controller: Femto micro F3
  • Brushless motor: 1104 5250KV
  • ESC: Bullet Series BLHeli – S 6A
  • Weight: 60.3g

Leave a Reply

Your email address will not be published. Required fields are marked *